Assembling baffl e and bird screen to heater
1. Working from the gas inlet end of the heater, remove the screws on both sides that secure the case to the
heater's base.
Guardian 60: 3 screws
Guardian 100: 4 screws. (shown-Fig. 12)
2. Install the baffl e to the heater base using the screws removed in step 1. See Fig. 12. Ensure the baffl e is
located between the inside of the access door and the heater case at the gas inlet end of the heater. See Fig.
13. This allows opening of the door for service or maintenance. Tighten all screws securely.
FIG. 12
REMOVE SCREWS
FIG. 13
Outdoor Installation Kit • Guardian 60_100
Outdoor Installation Kit
7