TransAct ITHACA 80PLUS Operator's Manual page 23

Note: Be sure to save the box and packing materials in
case you need to send the printer in for service.
1. Before removing the printer, examine the outside
of the box for signs of damage.
If any damage has occurred to the box, carefully examine the
printer and accessories before setting up the printer. Report all
evidence of damage or abuse to your dealer and shipper.
2. Open the box, and remove the unpacking and supplies envelope.
3. Carefully lift the printer out of the box, and set it on a sturdy, flat surface.
4. Separate the printer from the packing material.
Simply reverse these steps if you need to repack the printer to
send in for service. (You will not need to repack the supplies).
5. Check the printer and accessories for any signs of damage.
If the printer or any parts are damaged, report this to
your dealer and shipper immediately.
Setting up the Printer