Restoring Saved Data - Bernina COLLEGE 455 User Manual

> Tap «Machine settings».
> Tap «Maintenance/updates».
> Tap «Firmware update».
UPDATE
> To back up personal data and settings, tap «Save Data».
– Wait until the data has been backed up onto the USB stick.
NOTICE Incomplete update because the BERNINA USB stick was removed too soon
If the software has not been updated or has not been fully updated, the machine cannot be used.
> Remove the BERNINA USB stick only once the update has been successfully completed.
> To start the firmware update, tap «Start firmware update».
Update
Update
– Wait until the firmware update has finished.

Restoring saved data

If personal data and settings are not available after a software update, they can be transferred to the
machine again afterwards.
> Insert the USB stick with the saved data and settings into the USB port of the machine.
> Tap «Home».
> Tap «Setup Pogram».
> Tap «Machine settings».
> Tap «Maintenance/updates».
> Tap «Firmware update».
UPDATE
> Tap «Load Data».
> Wait until the data has been fully transferred.
The BERNINA USB stick (optional accessory) has been removed too early
NOTICE
Saved data cannot be transferred and the machine cannot be used.
> Remove the BERNINA USB stick (optional accessory) only after the saved data has been transferred
successfully.
> Remove the USB stick.
Care and maintenance
101