Installation - Yunca Gas LEEDZ INBUILT Operations, Maintenance & Warranty Information

INSTALLATION

Considerations
The most desirable and beneficial location for a YUNCA LEEDS INBUILT HEATER is in the centre of
a building, thereby allowing the most efficient use of the heat created.
The location of windows, doors and the traffic flow in the room where the heater is to be located,
should all be considered.
To obtain maximum heat distribution with any heater a ceiling fan can be fitted.
Another important consideration when installing the Yunca Leedz is availability of power supply to the
fan and plumbing of gas line.
When the appropriate position has been selected the unit can be inserted into the prepared cavity and
bolted to the floor to ensure that the unit remains secure in the event of an earthquake or similar. A
cardboard template has been supplied with your heater and should be placed on the floor so holes can
simply be drilled through the template.
If the heater is being attached to a concrete floor dyna bolts should be used, if the floor is wooden the
bolts used should be long enough to go fully through the floorboards and fixed with nuts and washers
from the underside.
The earthquake brackets are located at the front corners of the heater and are exposed by removing
the hearth.
09-06-01 Page 4 of 4 op-instruct-leedz-ib.doc