Advertisement
PROGRAMMING - RTS
PROGRAMMING STEPS (must follow in order)
Step 1: Fine tune lower limit
Step 2: Assign shades to groups
Step 3: Pair groups to control system (Mylink, LinkPro)
Each RTS Nano shade includes an installation remote that is used to adjust limits and program
group controls. These installation remotes are uniquely numbered to the shade they are paired
with. The lower limit of every shade is preprogrammed to ½" from the bottom of the window.
After installing each shade, follow these steps to adjust the lower limit:
STEP 1 - Fine tuning lower limit :
1. Beginning with the first shade, pull plastic tab from remote and press
to lower limit set at the factory.
2. When shade has stopped, adjust the lower limit by holding
shade jogs.
3. Use
or
to move the shade to the desired lower limit.
4. Hold the "My" button until the shade jogs again.
5. Repeat this procedure at each window until all shades have lower limits set to desired positions.
Assign shades to groups :
STEP 2 -
Next, program group controls. To pair with a permanent transmitter
such as a multichannel Telis or DecoFlex, follow these steps.
1. Press and hold the program button on the back of the installation
remote until the shade jogs.
2. Select the channel where you want to create a group, then bump
(do not hold down) the program button on the back of the remote -
the shade will jog.
3. Both remotes now control the shade.
4. Continue doing this with each shade until all shades are
programmed in the desired groups.
NOTE: Each RTS motor can be paired with 12 unique transmitters.
STEP 3 - Pair Groups to control system (LinkPro, myLink) :
1. Download the myLink app.
2. Pair the grouped shades with LinkPro or MyLink according to the instructions in the myLink app.
Programming - RTS
Warning: Do not
attempt to use any
installation remote until all
the shades are installed.
allowing shade to run
and
simultaneously until the
Installation
Remote
hold the button
until the shade jogs
(light on the motor
turns green).
Permanent
Remote
Bump
(do not hold)
5
Advertisement
