Random Track Play (Mix); Scanning Tracks (Scan); Repeating Tracks (Repeat); Interrupting Playback (Pause) - Blaupunkt SEVILLA MP38 Operating And Installation Instructions

CD mode

Random track play (MIX)

Press the 5 MIX button 9.
u
"MIX CD" appears briefl y on the display and
the MIX symbol is displayed. The next ran-
domly selected track will then be played.
Cancelling MIX
u Press the 5 MIX button 9 again.
"MIX OFF" appears briefl y on the display
and the MIX symbol disappears.

Scanning tracks (SCAN)

You can scan (briefl y play) all the tracks on
the CD.
u Press the MENU•OK button 5 for
longer than two seconds.
The next track will then be scanned. "SCAN"
appears on the display and the current track
number is fl ashing.
Note:
You can set the scan time. For further
information, please read the section
entitled "Setting the scanning time" in
the "Radio mode" chapter.
Cancelling Scan and continuing listening
to a track
To end the scanning process,
u press the MENU•OK button 5.
The currently scanned track will then con-
tinue to be played normally.
52

Repeating tracks (REPEAT)

If you want to repeat a track,
u press the 4 RPT button 9.
"RPT TRCK" appears briefl y on the display
and the RPT symbol is displayed. The track
is repeated continuously until you deacti-
vate Repeat.
Cancelling Repeat
If you want to cancel the repeat function,
u press the 4 RPT button 9 again.
"RPT OFF" appears briefl y on the display
and the RPT symbol disappears. Normal
playback is then resumed.

Interrupting playback (PAUSE)

u
Press the button 3
"PAUSE" appears on the display.
Cancelling pause
u
During the pause, press the button 3
9.
Playback is continued.
Confi guring the display
You can choose from various display op-
tions in CD mode:
• Track number and playing time
• Track number and time
To switch between the display options,
u press the DIS button :.
9.