Setting The Left/Right Volume Distribution (Balance); Adjusting The Front/Rear Volume Distribution (Fader) - Blaupunkt SEVILLA MP38 Operating And Installation Instructions

Sound
Adjusting treble frequency and level
Press the AUD button >.
u
"BASS" appears on the display.
u
Press the or
until "TREBLE" appears on the display.
u button 4 once to reach
Press the
the TREBLE submenu.
or button 4 repeatedly
u
Press the
until the desired treble frequency ap-
pears on the display.
u
Press the or
the level between -7 and +7.
u Press the AUD > button twice to exit
the menu.
Note:
If an Equaliser preset (POP, ROCK,
CLASSIC) is selected, the manual in-
crease of the treble level does not re-
sult in an audible change starting at a
certain setting. For further informa-
tion, please read the note in the section
entitled "Equaliser presets".
Setting the left/right volume
distribution (Balance)
To adjust the left/right volume distribution
(balance),
press the AUD button >.
u
"BASS" appears on the display.
u
Press the or
until "BAL" appears on the display with
the current setting.
u
Press the or
the balance (right/left).
u Press the AUD > button to exit the
menu.
62
button 4 repeatedly
button 4 to adjust
button 4 repeatedly
button 4 to adjust
Adjusting the front/rear volume
distribution (Fader)
To adjust the front/rear volume distribution
(fader),
press the AUD button >.
u
"BASS" appears on the display.
u
Press the or
ly until "FADER" appears on the display
with the current setting.
u
Press the or
the volume distribution front/rear.
u Press the AUD > button to exit the
menu.
button 4 repeated-
button 4 to adjust