Selecting The Waveband/Memory Bank; Tuning Into A Station - Blaupunkt SEVILLA MP38 Operating And Installation Instructions

Radio mode
When you have fi nished making your chang-
es,
u press the ESCAPE button <.
Switching the RDS function on/off
To switch the RDS functions AF and
REGIONAL on or off,
u press and hold the TRAF button 3 for
longer than two seconds.
If the RDS comfort function is active, the
RDS symbol appears on the display.
Selecting the waveband/memory
bank
This device can receive programmes broad-
cast over the FM frequency range as well as
the MW and LW (AM) wavebands. There are
three memory banks available for the FM
waveband (FM1, FM2 and FMT) and one
for each of the MW and LW wavebands.
Five stations can be stored in each memory
bank.
To switch between the FM memory banks
(FM1, FM2 and FMT) and the MW and LW
wavebands,
u press the BND button =.

Tuning into a station

There are various ways of tuning into a sta-
tion.
Automatic station seek tuning
u
Press the or
The radio tunes into the next receivable sta-
tion.
46
button 4.
Note:
If the priority for traffi c information is
active (the display shows the traffi c
jam symbol), the next traffi c informa-
tion station is set.
Tuning into stations manually
You can also tune into stations manually.
Note:
You can only tune into stations manu-
ally if the convenient RDS function is
deactivated.
To change the set frequency in small incre-
ments,
u
briefl y press the
To change the set frequency quickly,
u
press and hold down the
4 for a longer period of time.
Browsing through broadcasting
networks (FM only)
If a radio station provides several pro-
grammes, you have the option of browsing
through its so-called "broadcasting net-
work".
Note:
The convenient RDS function must be
activated before you can use this fea-
ture.
u
Press the or
to the next station on the broadcasting
network.
Note:
When using this feature, you will only
be able to switch to stations that you
have received once before already. To
or button 4.
or button
button 4 to switch