Traffi C Information; Switching Traffi C Information Priority On/Off; Setting The Volume For Traffi C Announcements - Blaupunkt SEVILLA MP38 Operating And Installation Instructions

Traffi c information
Traffi c information
Your device is equipped with an RDS-EON
receiver. EON (Enhanced Other Network)
ensures that whenever a traffi c announce-
ment (TA) is broadcast, the system switch-
es automatically from a station that does
not provide traffi c reports to the appropri-
ate traffi c information station within the
broadcasting network that does.
Once the traffi c report has been played, the
system will switch back to the programme
that you were listening to before.
Switching traffi c information
priority on/off
u Press the TRAF button 3.
The priority for traffi c announcements is ac-
tivated if the display shows the traffi c jam
symbol.
Notes:
You will hear a warning beep:
• If you leave the reception area of a
traffi c information station that you
are currently listening to.
• If you leave the reception area of a
traffi c information station that the
system is tuned into while you are in
the CD or CD changer mode, and the
subsequent automatic seek tuning
cannot fi nd a new traffi c information
station.
• If you retune the radio from a traffi c in-
formation station to a station that does
not broadcast traffi c information.
50
If you hear the warning beep, you can ei-
ther switch off traffi c information priority
or tune into a station that broadcasts traffi c
information.
Setting the volume for
traffi c announcements
u Press the MENU•OK button 5.
u
Press the or
edly until "TA VOLUME" appears on the
display.
button 4 to open the
u
Press the
menu.
u
Set the volume with the
4.
To help you adjust the setting more easily,
the device will increase or decrease the vol-
ume as you make your changes.
When you have fi nished making your chang-
es,
press the ESCAPE button <.
u
Notes:
Using the volume control 7, you can
•
also adjust the volume during a traf-
fi c announcement for the duration of
that announcement.
• During traffi c reports, you can adjust
the sound settings and volume distri-
bution settings for traffi c announce-
ments. For further information, please
read the "Sound" chapter.
button 4 repeat-
or button