Selecting Tracks; Fast Track Selection; Fast Searching (Audible); Random Track Play (Mix) - Blaupunkt Bahamas MP46 Operating And Installation Instructions

The drive draws in the CD automatically.
You must not hinder or assist the drive as it
draws in the CD.
u
Gently close the control panel whilst
exerting a little pressure until you feel
it click into place.
The CD starts playing and "CD" appears on
the display.
Note:
If the vehicle ignition was switched
off prior to inserting the CD, you must
switch the device on fi rst with the but-
ton 1 to start the playback.
If a CD is already inserted in the drive,
u Press the SOURCE button 4 repea-
tedly until "CD" appears on the display.
Playback begins from the point at which it
was last interrupted.

Selecting tracks

u Press one of the arrow buttons : to
select the next or previous track.
or button : once, the
If you press the
player will play the current track again from
the beginning.

Fast track selection

To quickly select tracks backwards or for-
wards,
u
Press and hold down the
: until fast track selection backwards
/ forwards begins.

Fast searching (audible)

To fast search backwards or forwards,
u
Press and hold down the
: until fast searching backwards / for-
wards begins.

Random track play (MIX)

u Press the 5 MIX button ;.
"MIX DISC" appears briefl y on the display
and the MIX symbol is displayed. The
next randomly selected track will then be
played.
Cancelling MIX
u Press the 5 MIX button ; again.
"MIX OFF" appears briefl y on the display
and the MIX symbol disappears.

Scanning tracks (SCAN)

You can scan (briefl y play) all the tracks on
the CD.
u Press the MENU button 9 for longer
than 2 seconds.
"SCAN DISC" apears briefl y on the display,
and the next track will then be scanned.
Note:
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
or button time" in the "Radio mode" chapter.
CD mode
or button
15