Adjusting The Display Settings; Adjusting The Display Brightness; Setting The Display Illumination Colour - Blaupunkt SEVILLA MP38 Operating And Installation Instructions

Display
Adjusting the display
settings

Adjusting the display brightness

If your car sound system is installed as de-
scribed in the installation instructions and
your vehicle features the corresponding
connection, the display brightness for day
and night is switched by switching on the
vehicle lighting. The display brightness can
be adjusted separately for day and night in
increments from 1 - 9.
Press the MENU•OK button 5.
u
u
Press the or
until "DIM DAY" or "DIM NIGHT" appears
on the display.
u button 4 to open the
Press the
menu.
u
Press the or
between the brightness levels.
When you have fi nished making your
changes,
u press the ESCAPE button <.
Setting the display illumination
colour
For the display illumination, you can mix a
colour from the RGB spectrum (red green
blue) or select a colour during a colour
seek.
Mixing a colour for the display
illumination
To customise the display illumination to suit
your tastes you can mix a colour yourself
using the three primary colours red, green
and blue.
u Press the MENU•OK button 5.
64
button 4 repeatedly
button 4 to switch
u
Press the or
edly until "DISP COL" appears on the
display.
u button 4 to open the
Press the
menu.
The menu for mixing your own colour is dis-
played. "R", "G", and "B" are displayed with
the current values. The setting for "R" is ac-
tivated.
u
Press the or
edly until the desired colour value is
displayed.
u Press the or button 4 to move the
selection marker to the position after
the other colours.
u
Adjust the other colour components to
suit your preferences.
When you have fi nished making your
changes,
u press the ESCAPE button <.
Selecting a display illumination during a
colour scan
u Press the MENU•OK button 5.
u
Press the or
edly until "COL SCAN" appears on the
display.
u button 4 to start the col-
Press the
our seek.
The device starts changing the display illu-
mination colour.
To select the currently set colour,
u press the MENU•OK button 5.
To start the seek tuning again,
u press the button 4.
If you found the desired colour,
u press the ESCAPE button <.
button 4 repeat-
button 4 repeat-
button 4 repeat-