Selecting The Waveband / Memory Bank; Tuning Into A Station; Setting The Sensitivity Of Station Seek Tuning - Blaupunkt Toronto MP73 Operating Instructions Manual

RADIO MODE
Selecting the waveband /
memory bank
This unit can receive programmes
broadcast over the FM and AM wave-
bands. There are four memory banks
(FM1, FM2, FM3 and FMT) for the FM
waveband and three memory banks
(AM1, AM2 and AMT) for the AM wave-
band. Six stations can be stored in each
memory bank.
Selecting the waveband
To select the FM or AM waveband,
press the TUNER button < in ra-
dio mode.
The radio functions menu appears in the
display.
Press the softkey 4 assigned to
the "BAND" display item.
Press the softkey 4 assigned to
the "FM" display item for the FM
waveband.
Press the softkey 4 assigned to
the "AM" display item for the AM
waveband.
The main radio menu for the selected
waveband appears.
Selecting the memory bank
To switch between the FM memory
banks (FM1, FM2, FM3 and FMT) or
AM memory banks (AM1, AM2 and
AMT),
select the required FM or AM
waveband.
18
Repeatedly press the NEXT button
3 until the required memory bank
appears in the display.
The memory banks are accessed in the
following order: FM1, FM2, FM3, FMT
or AM1, AM2, AMT.

Tuning into a station

There are various ways of tuning into a
station.
Automatic seek tuning
Move the joystick 7 down or up.
The unit tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manual-
ly.
Move the joystick 7 left or right.
Note:
You can only tune into stations manual-
ly on the FM waveband if the RDS func-
tion is deactivated.
Setting the sensitivity of station
seek tuning
You can choose whether to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
press the TUNER button < in ra-
dio mode.
The radio functions menu appears in the
display.
Press the NEXT button 3.
Press the softkey 4 assigned to
the "SENS" display item.