Install Cooling Fan Cover - Toyota pmn Installation Instructions Manual

58
R
a
R
b
K
R a
a R
R b
R a
(j) Route the harness branch with the ground connection
towards the original ground connection bolt.
(k) Install the ground connection.
Torque: 9 Nm
(l) Route the harness towards the bonnet hinge and
follow the original vehicle harness.
NOTICE: Ensure that there is enough harness
slack to avoid harness damage due to
engine movement.
Ensure that the harness is secured every
15 cm using the tie wraps.
K: Tie wraps (23-8)

17. INSTALL COOLING FAN COVER.

(a) Install the cooling fan cover onto the engine bonnet
R
using 4 bolts and a clip.
a
R: Bolt (4 pcs.).
K: Clip (24-13)
Torque: 6 Nm
K: Cover (22-1)
(b) Connect the wiring harness to the temperature sensor.
(c) Remove the plastic clip and position the vehicle and
cooling fan harness behind the sound insulation.
(d) Install the sound insulation with the 2 clips.
K: Clip (2 pcs.) (24-12)
(e) Install the Tie wrap and clip onto the wiring harness of
the temperature sensor.
K: Clip (2 pcs.) (23-9)