Install Oil Pressure Tube; Install Intercooler Outlet Pipe - Toyota pmn Installation Instructions Manual

K
K
K
K
K
K
K
K
K
K

8. INSTALL OIL PRESSURE TUBE.

(a) Install the oil pressure tube onto the inlet pipe using
the clamps.
K: Clamp (2 pcs.) (13-4)

9. INSTALL INTERCOOLER OUTLET PIPE.

(a) Position intercooler outlet pipe, hose and 2 hose
clamps.
K: intercooler outlet pipe (8-1)
K: Hose intercooler side (8-2)
K: Clamp (2 pcs.) (8-4)
(b) Tighten outer hose clamp on intercooler side.
Torque: 3 Nm
(c) Pull outlet pipe 5 mm out of the hose and hand tighten
inner clamp.
(d) Position intercooler outlet pipe, hose and 2 clamps.
K: Hose throttle body side (8-3)
K: Clamp (2 pcs.) (8-5)
(e) Tighten outer hose clamp on the throttle body side.
Torque: 3 Nm
(f) Pull outlet pipe 5 mm out of the hose and tighten inner
clamp.
Torque: 3 Nm
(g) Install the plastic clamp on the outlet pipe and the A/C
hose.
K: Clamp (8-6)
51