Inlet Pipe Preparation; Install Vacuum Hose Adapter; Preparation Of Vsv; Install Vsv - Toyota pmn Installation Instructions Manual

9.

Inlet pipe preparation

R
Ø 6.5 mm
K
K
R
K
K
R
K

1. INSTALL VACUUM HOSE ADAPTER.

(a) Put Loctite 270 on the hose adapter.
(b) Install the hose adapter into the inlet pipe.
K: Vacuum hose adapter (2-5)
K: Inlet pipe (2-2)
Torque: 25 Nm

2. PREPARATION OF VSV.

(a) Mark the VSV bracket for drilling
(b) Drill a 6.5 mm hole into the VSV bracket.
R: VSV

3. INSTALL VSV.

(a) Install the VSV onto the inlet pipe with the bolt.
K: Bolt (2-10)
K: Washer (2-9)
K: Nut (2-11)
R: VSV
Torque: 9 Nm
39