Vehicle Preparation; Remove Carbon Canister; Remove Harness Clamps - Toyota pmn Installation Instructions Manual

30
3.

Vehicle preparation

B
C U
U
U
U
R
C
R
A
A
A
B

1. REMOVE CARBON CANISTER.

(a) Remove the clamp of the vacuum hose.
R: Clamp
(b) Disconnect the vacuum hoses from the carbon
canister.
(c) Remove the carbon canister from its bracket by sliding
it upwards.
R: Carbon canister

2. REMOVE HARNESS CLAMPS.

(a) Cut the harness clamp (A) from the harness.
U: Harness clamp
(b) Reposition the harness (B).
(c) Reinstall the carbon canister
(d) Reconnect the carbon canister hoses with the clamp.
B
(e) Fix the harness to the carbon canister clip (C).
(f) Remove the harness clamp out of the body panel.
U: Harness clamp
(g) Remove the plastic plug from the body panel.
U: Plug
(h) Reposition the harness clamp.