Installation Engine Compartment; Install Exhaust Manifold Gasket; Install Exhaust Manifold; Position Turbo Charger - Toyota pmn Installation Instructions Manual

46

14. Installation engine compartment

K
K
1x
K
K
K 5x
K
K 3x
K 2x

1. INSTALL EXHAUST MANIFOLD GASKET.

(a) Place the new gasket onto the cylinder head studs.
K: Gasket (9-2)

2. INSTALL EXHAUST MANIFOLD.

(a) Install the exhaust manifold onto the cylinder head
using the 5 nuts.
K: Nuts (5 pcs.) (9-3)
K: Exhaust manifold (9-1)
Torque: 37 Nm

3. POSITION TURBO CHARGER.

(a) Position the Turbo charger underneath the exhaust
manifold.
K: Turbo charger (3-1)
(b) Position the gasket between the manifold and the
Turbo charger.
K: Gasket (3-7)
NOTICE: The embossed side of the gasket should
face towards the exhaust manifold.

4. INSTALL TURBO CHARGER.

(a) Install the 4 bolts with the locking-plates (hand
tighten).
NOTICE: The left front bolt is short (25 mm length).
K: Bolt (3 pcs.) (4-1)
K: Locking plate (2 pcs.) (4-3)
K: Bolt (4-2)