Install Oil Return Hose; Install Wiring Harness - Toyota pmn Installation Instructions Manual

K
K
K
K
K
K
K
K
K
K
K
200mm
K

15. INSTALL OIL RETURN HOSE.

(a) Install the oil return hose onto the oil return pipe and
oil pan adapter using 2 clamps.
K: Clamp (2 pcs.) (14-6)
K: Oil return hose (14-5)

16. INSTALL WIRING HARNESS.

(a) Insert the 15A fuse into the wiring harnesss fuse-
socket.
K: 15A Fuse (23-6)
(b) Insert the vacuum hose into the grommet. Ensure that
that 200mm of vacuum hose and wiring harness
length is in the interior compartment.
K: Vacuum hose (25-1)
(c) Install the wiring harness grommet into the bulk-head
hole. (Short end towards interior)
K: Wiring harness No. 2 (23-2)
(d) Install the cable tie wraps into the body holes.
K: Tie wraps (2 pcs.) (23-9)
(e) Route the harness branch with the eyelet towards the
positive battery terminal following the original vehicle
harness using the tie wraps.
K: Tie wraps (5 pcs.) (23-8)
(f) Route the other harness branch together with the
vacuum hose through the tie wraps.
(g) Tighten the tie wraps.
(h) Connect the vacuum hose to the vacuum T-junction.
(i) Route the wiring harness alongside the engine
harness and fix the harness with the original harness
clamps.
57