Teknion Marini Adjustment Features & Instructions

Download this manual

SEAT HEIGHT ADJUSTMENT

To raise the chair, lift the lever up

while lifting your weight from the

seat until you reach the desired level,

then release to lock in place. To

lower the chair, lift the lever up and

allow your weight to push the seat

down until you reach the desired

level, then release to lock in place.

SEAT DEPTH ADJUSTMENT

To adjust the seat depth, lift the

lever up and simultaneously lift

your weight from the seat while

sliding the seat forward or

backward. Release lever to lock the

seat in place.

marini adjustment features & instructions

To adjust the angle of reclination,

push the lever down to unlock the

back. Recline to the desired

position and lift the lever up to

lock in place or leave to allow

backrest to recline freely.

Leaning back, determine if the

resistance of the chair is comfortable.

For less resistance, pull tension

adjustment knob out and turn it

counter clockwise. For greater

resistance, turn the knob clockwise.

BACK TILT ADJUSTMENT

TILT TENSION ADJUSTMENT

Need help?

Do you have a question about the Marini and is the answer not in the manual?

Page 1 & instructions SEAT HEIGHT ADJUSTMENT BACK TILT ADJUSTMENT To raise the chair, lift the lever up To adjust the angle of reclination, while lifting your weight from the push the lever down to unlock the seat until you reach the desired level, back.
Page 2 & instructions ARM HEIGHT ADJUSTMENT ARM WIDTH ADJUSTMENT To adjust the arm height, press the button located under the armrest to raise or lower it to the desired position. Release the button to lock in place. To adjust width of each arm, push the lever down and slide the arm to the desired position.