Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Teknion Manuals
  4. Indoor Furnishing
  5. Sidewise Series
  6. Installation manuals

Teknion Sidewise Series Installation Manuals

Hide thumbs

Advertisement

Quick Links

Download this manual
sidewise
INDEX
By Section
SOLO, CONSULTATION & MEETING
Desk Height Bullet Consultation Hub with Coat/Shelf
Desk Height Bullet Consultation Hub with Shelf
Desk Height Bullet Consultation Hub with Coat/Drawers
Desk Height Bullet Consultation Hub with Shelf/Drawers
Desk Height Bullet Consultation Hub with Multi-Drawer/Shelf
Desk Height Bullet Consultation Hub with Multi-Drawer/Drawers
Desk Height Bullet 51" High Consultation Hub with Shelf
Counter Height Bullet Consultation Hub with Coat/Shelf
Counter Height Bullet Consultation Hub with Shelf
Counter Height Bullet Consultation Hub with Multi-Drawer/Shelf
Counter Height Rectangular Consultation Hub with Multi-Drawer/Drawers
Lounge Height Round Meeting Hub with Shelf
Counter Height Round Meeting Hub with Coat/Shelf
Desk Height Round Meeting Hub with Coat/Shelf
Desk Height Rectangular Solo Desk with Coat/Shelf
Desk Height Rectangular Solo Desk with Shelf
Desk Height Rectangular Solo Desk with Coat/Drawers
Desk Height Rectangular Solo Desk with Shelf/Drawers
Desk Height Rectangular Solo Desk with Multi-Drawer/Shelf
Desk Height Rectangular Solo Desk with Multi-Drawer/Drawers
Desk Height Rectangular Consultation Hub with Coat/Shelf
Desk Height Rectangular Consultation Hub with Shelf
Desk Height Rectangular Consultation Hub with Coat/Drawers
Desk Height Rectangular Consultation Hub with Shelf/Drawers
Desk Height Rectangular Consultation Hub with Multi-Drawer/Shelf
Desk Height Rectangular Consultation Hub with Multi-Drawer/Drawers
Desk Height Rectangular 51" High Consultation Hub with Shelf
Counter Height Rectangular Consultation Hub with Coat/Shelf
Counter Height Rectangular Consultation Hub with Shelf
Counter Height Rectangular Consultation Hub with Multi-Drawer/Shelf
Counter Height Bullet Consultation Hub with Multi-Drawer/Drawers
Lounge Recliner with Coat/Shelf
Lounge Recliner with Coat/Drawers
Lounge Recliner Upholstered Cushions
JULY 2015
*Click on the desired Installation Guide to jump to the Guide page.
Product
Guide
Last
Code
No.
Updated
Product Name
ELECTRICS & ACCESSORIES
001
Sept. 2012
LED Ambient Light with Occupancy Sensor &
SWDBA
Mounting Hardware
YHRE3
Accessory Rail Element
SWDBC
Pull-Out CPU Shelf
SWDBD
Modesty Panel Glass
SWDBE
Modesty Panel Solid
SWDBF
DRAWER REMOVAL
SWEBB
Single and Multi Drawer Removal
SWCBA
SWCBB
SWCBE
SWCBF
SWLMB
SWCMA
SWDMA
002
Jul. 2015
SWDSA
SWDSB
SWDSC
SWDSD
SWDSE
SWDSF
SWDRA
SWDRB
SWDRC
SWDRD
SWDRE
SWDRF
SWERB
SWCRA
SWCRB
SWCRE
SWCRF
003
Jul. 2015
SWRA
SWRC
SWUC
Guide
Last
Product Code
No.
Updated
101
Sept. 2012
SWLED
102
Sept. 2012
SWDA
103
Sept. 2012
SWPS
104a
Jul. 2015
SWMPG
104b
Sept. 2012
SWMPS
201
Sept. 2012
PAGE 1 OF 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Sidewise Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Teknion Sidewise Series

Summary of Contents for Teknion Sidewise Series

  • Page 1 sidewise *Click on the desired Installation Guide to jump to the Guide page. INDEX By Section Product Guide Last Guide Last Code Updated Product Name Product Code Updated SOLO, CONSULTATION & MEETING ELECTRICS & ACCESSORIES Desk Height Bullet Consultation Hub with Coat/Shelf Sept.
  • Page 2 (STSWDWXXYY72XX) x1 (STSWDWXX3672XX) x1 G2 - "D" Surface (STSWLMBX3651XX) x1 (SWWDB36(XX-XX)6) x1 I - Wire Management J - Wire Management Tube Tube With With Adhesive Strip For Customer Support please contact Adhesive Strip (B11-67000+11) x 1 product.support@teknion.com (B11-67000+29) x 1...
  • Page 3 sidewise Section: Date: Sep 2012 Page No: 2 of 15 Description: SID_001 SLIDE OUT COVERS ALIGN SUPPORT ASSEMBLY NOTE: Re-insert Covers after Worksurface Support and Worksurface are installed. STEP 1: Slide out both Support Covers. STEP 1: STEP 2: Align the pilot holes on the back of the Covers and Tower. NOTE: Re-insert Covers after Worksurface Support and Worksurface are installed.
  • Page 4 sidewise Section: Date: Sep 2012 Page No: 3 of 15 Description: SID_001 SECURE SUPPORT ASSEMBLY DETAIL VIEW STEP 3: Secure Worksurface Support and Tower with Screws.
  • Page 5 sidewise Section: Date: Sep 2012 Page No: 4 of 15 Description: SID_001 WIRE MANAGEMENT TUBE (OPTION 1) WIRE MANAGEMENT TUBE (OPTION 2) NOTE: Please refer to Specification Drawing NOTE: Please cut the 280mm Wire for the length of Tube. Management Tube to 128mm long for 1) Single side, Desk Height with 24"...
  • Page 6 sidewise Section: Date: Sep 2012 Page No: 5 of 15 Description: SID_001 ATTACH WIRE MANAGEMENT TUBE (DUAL SIDED, DESK HEIGHT WITH 36" WIDE STORAGE TOWER) SIDE VIEW BOTTOM VIEW TOP VIEW STEP 5a: Please attach Wire Management Tube as shown for Dual Sided Desk with 36" wide Storage Tower.
  • Page 7 sidewise Section: Date: Sep 2012 Page No: 6 of 15 Description: SID_001 ATTACH WIRE MANAGEMENT TUBE (COUNTER HEIGHT STORAGE TOWER) SIDE VIEW BOTTOM VIEW TOP VIEW STEP 5b: Please attach Wire Management Tube as shown for Counter Height Storage Tower.
  • Page 8 sidewise Section: Date: Sep 2012 Page No: 7of 15 Description: SID_001 ATTACH WIRE MANAGEMENT TUBE (SINGLE SIDED, DESK HEIGHT WITH 24" WIDE STORAGE) BOTTOM VIEW SIDE VIEW TOP VIEW STEP 5c: Please attach Wire Management Tube as shown for Single Side, Desk Height with 24" Wide Storage Tower.
  • Page 9 sidewise Section: Date: Sep 2012 Page No: 8 of 15 Description: SID_001 ATTACH WIRE MANAGEMENT TUBE (SINGLE SIDED, DESK HEIGHT WITH 30" WIDE STORAGE) BOTTOM VIEW SIDE VIEW TOP VIEW STEP 5d: Please attach Wire Management Tube as shown for Single Side, Desk Height with 30" Wide Storage Tower.
  • Page 10 sidewise Section: Date: Sep 2012 Page No: 9 of 15 Description: SID_001 GUIDE CABLE THROUGH SUPPORT RUN CABLE INTO STORAGE TOWER BOTTOM VIEW STEP 6: Guide Cable through Worksurface Support. STEP 7: Run Cable into Storage Tower.
  • Page 11 sidewise Section: Date: Sep 2012 Page No: 10 of 15 Description: SID_001 INSERT CABLE (DESK HEIGHT) INSERT CABLE (COUNTER HEIGHT) BOTTOM VIEW STEP 8a: Insert Cable into Wire Management Tube. STEP 8b: Insert Cable into Wire Management Tube.

  • Page 12: Adjust Height

    sidewise Section: Date: Sep 2012 Page No: 11 of 15 Description: SID_001 REMOVE LOCKING SCREWS ADJUST HEIGHT STEP 9: Remove Locking Screws from Pedestal Leg. STEP 10: Rotate The Top Plate from Pedestal Leg to the same height as the Bridge Connection.
  • Page 13 sidewise Section: Date: Sep 2012 Page No: 12 of 15 Description: SID_001 NOTE NOTE: Align the pilot holes under Worksurface corresponding to Pedestal Leg and Worksurface Support. ALIGN SIDE VIEW FINISHED FLOOR NOTE: Please measure the height of the Bridge Connection and adjust the Pedestal Leg to the same height. Align the pilot holes under Worksurface corresponding to Pedestal Leg and Worksurface Support.
  • Page 14 sidewise Section: Date: Sep 2012 Page No: 13 of 15 Description: SID_001 LEVEL WORKSURFACE SECURE PEDESTAL LEG STEP 11: Lay Worksurface on Bridge Connection and Pedestal Leg, then level it. STEP 12: Remove Worksurface, and fasten Screws on Pedestal Leg as shown to lock it in the adjusted height.
  • Page 15 sidewise Section: Date: Sep 2012 Page No: 14 of 15 Description: SID_001 SECURE WORKSURFACE DETAIL VIEW DETAIL VIEW STEP 13: Secure Worksurface on Support and Pedestal Leg with Screws.
  • Page 16 sidewise Section: Date: Sep 2012 Page No: 15 of 15 Description: SID_001 RE-INSERT WORKSURFACE SUPPORT COVER NOTE: Make sure to use the Support Cover with hole for the Power Bar side. STEP 14: Re-insert Worksurface Support Cover. NOTE: Make sure to use the Support Cover with hole for the Power Bar side.
  • Page 17 G - Frame Bracket (N80-64157+36+29) x1 Hardware Kit (X80-64117) x1 (N80-64157+36+36) x1 H - Wire Management I - Wire Management Tube With Tube With Adhesive Strip Adhesive Strip (B11-67000+29) x 1 (B11-67000+11) x 1 For Customer Support please contact product.support@teknion.com...
  • Page 18 sidewise Section: Date: Jul 2015 Page No: 2 of 15 Description: SID_002 SLIDE OUT COVERS ALIGN SUPPORT ASSEMBLY NOTE: Re-insert Covers after Worksurface Support and Worksurface are installed. STEP 1: Slide out both Support Covers. STEP 2: Align the pilot holes on the back of the Covers and Tower. NOTE: Re-insert Covers after Worksurface Support and Worksurface are installed.
  • Page 19 sidewise Section: Date: Jul 2015 Page No: 3 of 15 Description: SID_002 SECURE SUPPORT ASSEMBLY DETAIL VIEW STEP 3: Secure Worksurface Support and Tower with Screws.
  • Page 20 sidewise Section: Date: Jul 2015 Page No: 4 of 15 Description: SID_002 WIRE MANAGEMENT TUBE (OPTION 1) WIRE MANAGEMENT TUBE (OPTION 2) NOTE: Please refer to Specification Drawing NOTE: Please cut the 280mm Wire for the length of Tube. Management Tube to 128mm long for 1) Single side, Desk Height with 24"...
  • Page 21 sidewise Section: Date: Jul 2015 Page No: 5 of 15 Description: SID_002 ATTACH WIRE MANAGEMENT TUBE (DUAL SIDED, DESK HEIGHT WITH 36" WIDE STORAGE TOWER) SIDE VIEW BOTTOM VIEW TOP VIEW STEP 5a: Please attach Wire Management Tube as shown for Dual Sided Desk with 36" wide Storage Tower.
  • Page 22 sidewise Section: Date: Jul 2015 Page No: 6 of 15 Description: SID_002 ATTACH WIRE MANAGEMENT TUBE (COUNTER HEIGHT STORAGE TOWER) SIDE VIEW BOTTOM TOP VIEW VIEW STEP 5b: Please attach Wire Management Tube as shown for Counter Height Storage Tower.
  • Page 23 sidewise Page No: Page No: Section: Date: Jul 2015 Page No: 7of 15 Description: SID_002 ATTACH WIRE MANAGEMENT TUBE (SINGLE SIDED, DESK HEIGHT WITH 24" WIDE STORAGE) BOTTOM VIEW SIDE VIEW TOP VIEW STEP 5c: Please attach Wire Management Tube as shown for Single Side, Desk Height with 24" Wide Storage Tower.
  • Page 24 sidewise Section: Date: Jul 2015 Page No: 8 of 15 Description: SID_002 ATTACH WIRE MANAGEMENT TUBE (SINGLE SIDED, DESK HEIGHT WITH 30" WIDE STORAGE) BOTTOM VIEW SIDE VIEW TOP VIEW STEP 5d: Please attach Wire Management Tube as shown for Single Side, Desk Height with 30" Wide Storage Tower.
  • Page 25 sidewise Section: Date: Jul 2015 Page No: 9 of 15 Description: SID_002 GUIDE CABLE THROUGH SUPPORT RUN CABLE INTO STORAGE TOWER BOTTOM VIEW STEP 6: Guide Cable through Worksurface Support. STEP 7: Run Cable into Storage Tower.
  • Page 26 sidewise Section: Date: Jul 2015 Page No: 10 of 15 Description: SID_002 INSERT CABLE (DESK HEIGHT) INSERT CABLE (COUNTER HEIGHT) BOTTOM VIEW BOTTOM VIEW STEP 8a: Insert Cable into Wire Management Tube. STEP 8b: Insert Cable into Wire Management Tube.
  • Page 27 sidewise Section: Date: Jul 2015 Page No: 11 of 15 Description: SID_002 ADJUST FRAME LEG HEIGHT DETAIL VIEW BOTTOM VIEW STEP 9: Rotate leveler to adjust the height for the Frame Leg. NOTE: Please refer to next page or Specification Drawing for the correct height of the Frame Leg.
  • Page 28 sidewise Section: Date: Jul 2015 Page No: 12 of 15 Description: SID_002 NOTE NOTE: Align the pilot holes under Worksurface corresponding to Frame Leg and Worksurface Support. ALIGN SIDE VIEW FINISHED FLOOR NOTE: Please measure the height of the Bridge Connection and adjust the Foot Frame to the same height. Align the pilot holes under Worksurface corresponding to Frame Leg and Worksurface Support.
  • Page 29 sidewise Section: Date: Jul 2015 Page No: 13 of 15 Description: SID_002 LEVELING WITH WORKSURFACE FINISHED FLOOR STEP 10: Lay Worksurface on Leg and Worksurface Support, then level it.
  • Page 30 sidewise Section: Date: Jul 2015 Page No: 14 of 15 Description: SID_002 SECURE WORKSURFACE DETAIL VIEW DETAIL VIEW BOTTOM VIEW STEP 11: Secure Worksurface on Support and Frame Leg with Screws.
  • Page 31 sidewise Section: Date: Jul 2015 Page No: 15 of 15 Description: SID_002 RE-INSERT WORKSURFACE SUPPORT COVER NOTE: Make sure to use the Support Cover with hole for the Power Bar side. STEP 12: Re-insert Worksurface Support Cover. NOTE: Make sure to use the Support Cover with hole for the Power Bar side.
  • Page 32 Fixed Bolster x10 Loose Bolster x6 G - Bolster (Q20-0486) x1 H - Seat NOTE: Please refer to (Q20-0487) x1 Installation Guide SID_201 to remove all Drawers and Shelves before proceeding this instrustion. For Customer Support please contact NOTE: SWRA shown. product.support@teknion.com...

  • Page 33: Wire Management

    sidewise Section: Date: Jul 2015 Page No: 2 of 8 Description: SID_003 WIRE MANAGEMENT REVERSE VIEW NOTE: Option without LED Cable LED installed shown. NOTE: Option with LED installed shown. Please refer to Installation Guide SID_101 for LED installation. STEP 1: Place Recliner in designated location and run all Cables through the cut-out on Recliner. NOTE: Please refer to Installation Guide SID_101 for LED installation.
  • Page 34 sidewise Section: Date: Jul 2015 Page No: 3 of 8 Description: SID_003 ATTACH RECLINER AND STORAGE TOWER DETAIL VIEW SIDE VIEW REVERSE VIEW STEP 2: Attach Recliner with Storage Tower. Secure Storage and Brackets on Recliner with Screws.
  • Page 35 sidewise Section: Date: Jul 2015 Page No: 4 of 8 Description: SID_003 INSERT ELECTRIC BAR SIDE VIEW STEP 3: Insert Electric Bar into the highlighted location.
  • Page 36 sidewise Section: Date: Jul 2015 Page No: 5 of 8 Description: SID_003 SECURE ELECTRIC BAR DETAIL VIEW REVERSE VIEW SIDE VIEW STEP 4: Secure the Electric Bar to Recliner as shown.
  • Page 37 sidewise Section: Date: Jul 2015 Page No: 6of 8 Description: SID_003 DRILL THROUGH PILOT HOLES STEP 5: Drill through the pilot holes on Recliner from underneath.
  • Page 38 sidewise Section: Date: Jul 2015 Page No: 7 of 8 Description: SID_003 SECURE SEAT SIDE VIEW BOTTOM VIEW STEP 6: Align pilot holes on Cushion and Recliner, then secure them with Screws as shown.
  • Page 39 sidewise Section: Date: Jul 2015 Page No: 8 of 8 Description: SID_003 SECURE BOLSTER REVERSE VIEW Important: For Loose Bolster application, please place the Bolster on Seat without fastening it to Storage Tower. STEP 7: Align pilot holes on Bolster and Storage Tower, then secure them with Screws as shown. Important: For Loose Bolster application, please place the Bolster on Seat.
  • Page 40 A2 - Occupancy Sensor (SWLED) B - #6 - " Wood Screw (FS6-1/2) x 4 C - Magnet 3M Double Sided Tape x 2 D - Wire Management Tube with Adhesive Strip (B11-67000+29) x 1 For Customer Support please contact product.support@teknion.com...
  • Page 41 sidewise Section: Date: Sep 2012 Page No: 2 of 12 Description: SID_101 CABLE THROUGH TOWER REMOVE SAFETY STOPPER LED Power Cable Align Mark TOP VIEW STEP 1: Feed power cable through top of Tower STEP 2: Place LED Light as shown on top of Tower. Mark (with pencil) for final location.
  • Page 42 sidewise Section: Date: Sep 2012 Page No: 3 of 12 Description: SID_101 MAGNET TO LED LED TO TOWER STEP 3: Turn over LED light and locate metal strips inserted at the bottom of LED light. STEP 4a: Peel off adhesive strip and place light on top surface of Tower. NOTE: Make sure adhesive side of magnet is facing upwards.
  • Page 43 sidewise Section: Date: Sep 2012 Page No: 4 of 12 Description: SID_101 FASTEN TO TOWER PLUG CABLE TO LED LED Power Cable STEP 4b: Fasten Led to Tower with screws provided. STEP 5: Plug Power Cable to LED.
  • Page 44 sidewise Section: Date: Sep 2012 Page No: 5 of 12 Description: SID_101 BOTTOM VIEW RELEASE TRIGGERS Adhesive Side STEP 6: Peel off the cover on Adhesive Strip. STEP 7: Attach Wire Management Tube as shown...
  • Page 45 sidewise Section: Date: Sep 2012 Page No: 6 of 12 Description: SID_101 INSERT CABLE LED Power Cable LED Power Cable STEP 8a: Insert Cable into Wire Management Tube and feed through opening located at the side of Tower.
  • Page 46 sidewise Section: Date: Sep 2012 Page No: 7 of 12 Description: SID_101 FLIP DOWN TRAY Worksurface Tower STEP 9a: Flip down tray of bridge...
  • Page 47 sidewise Section: Date: Sep 2012 Page No: 8 of 12 Description: SID_101 FASTEN SENSOR PLUG STEP 10a: Fasten Sensor to underside of Worksurface using screws provided STEP 11a: Place AC Adapter to tray of Bridge. Plug to any available socket.
  • Page 48 sidewise Section: Date: Sep 2012 Page No: 9 of 12 Description: SID_101 PLUG TO SENSOR LED Power Cable LED Power Cable STEP 12a: Plug LED Power Cable previously passed through opening of tower to Sensor.
  • Page 49 sidewise Section: Date: Sep 2012 Page No: 10 of 12 Description: SID_101 PLUG TO SENSOR LED Power Cable STEP 8b: Insert Cable into Wire Management Tube and feed through opening located at the side of Tower.
  • Page 50 sidewise Section: Date: Sep 2012 Page No: 11 of 12 Description: SID_101 SENSOR TO OPENING FASTEN SENSOR 6" STEP 9b: Bring Sensor to the inside opening of Recliner. STEP 10b: Fasten Sensor as shown using screws provided.
  • Page 51 sidewise Section: Date: Sep 2012 Page No: 12 of 12 Description: SID_101 LED CABLE TO SENSOR REVERSE VIEW STEP 11b: Plug LED Power Cable to Sensor and run all Cables through the cut-out on Recliner. NOTE: Refer to Installation Guide SID_003 for Lounge Recliner Installation.
  • Page 52 Accessory Rail Element (SWDA) Part and Product Identification A - #8x5/8" Recex Pan Head Wood Screw, Black (402100) x3 B - Insert Element Bracket (A15-64622+ww) x1 C - Accessory Inset Element (N80-61588+13+ww) x1 (N80-61588+15+ww) x1 MULTI-DRAWER For Customer Support please contact product.support@teknion.com...

  • Page 53: Bracket Assembly

    sidewise Section: Date: Sep 2012 Page No: 2 of 3 Description: SID_102 BRACKET ASSEMBLY PEEL OFF ADHESIVE STRIP COVER SIDE VIEW STEP 1: Attach Bracket onto the highlighted location under the fixed shelf as shown, and STEP 2: Flip over Inset Element, and peel off both adhesive covers. secure it with Screws.
  • Page 54 sidewise Section: Date: Sep 2012 Page No: 3 of 3 Description: SID_102 INSERT INSET ELEMENT ATTACH INSET ELEMENT SIDE VIEW SIDE VIEW STEP 3: Insert Inset Element to the Bracket at an angle as shown above. STEP 4: Rotate Inset Element and press it to attach the adhesive strips to the back panel.
  • Page 55 Part and Product Identification NOTE: Refer to Install Guide SID_201 if Shelf A - Pull Out CPU Shelf Installation/Removal from Rail (SWPS) x 1 is required B - Self Tap Wood Screw (E04-50005) x 10 For Customer Support please contact product.support@teknion.com...
  • Page 56 sidewise Section: Date: Sep 2012 Page No: 2 of 3 Description: SID_103 CPU SHELF TO TOWER ALIGN SHELF Align STEP 1: Place CPU Shelf at the bottom shelf cavity of Tower STEP 2: Align CPU Shelf to the bottom of Tower. Mark areas shown to fasten CPU Shelf to tower.
  • Page 57 sidewise Section: Date: Sep 2012 Page No: 3 of 3 Description: SID_103 PULL OUT SHELF FASTEN TO TOWER STEP 3: Pull Shelf so Tracks are fully extended. STEP 4: Fasten both Brackets with screws provided.
  • Page 58 (A21-50179) x 2 " - 20 x " Flat Point, Hex Socket Screw (E01- 50308) x As per order H - #14 x 1 " Quad Pan Head Wood Screw (E04-50059) x As per order For Customer Support please contact product.support@teknion.com...
  • Page 59 sidewise Section: Date: Jul 2015 Page No: 2 of 6 Description: SID_104a PLACEMENT OF MODESTY PANEL BRACKET PLACEMENT Underside View of Worksurface 16" max. Outline of Support Outline of Frame Leg 16" max. Underside View of Worksurface STEP 1: Illustration shows location for Modesty Panel. NOTE: All Brackets must be installed in the first 16"...
  • Page 60 sidewise Section: Date: Jul 2015 Page No: 3 of 6 Description: SID_104a ASSEMBLE BRACKETS, COVER & END CAPS INSERT BRACKETS INTO COVER Underside View of Worksurface STEP 2: Assemble Brackets, Modesty Panel Cover and End Caps together as show on STEP 3: Angle Bracket to Cover as shown.
  • Page 61 sidewise Section: Date: Jul 2015 Page No: 4 of 6 Description: SID_104a FASTEN BRACKET & SPACER TO WORKSURFACE STEP 4: Fasten Bracket and Spacer to underside of Worksurface.
  • Page 62 sidewise Section: Date: Jul 2015 Page No: 5 of 6 Description: SID_104a INSTALL GLASS PANEL & PLASTIC GASKET TIGHTEN ASSEMBLY BRACKET SCREWS Rubber STEP 5: Insert Glass Panel to Plastic Gasket. Then line up Gasket to cavity of Endcap. STEP 6: Tighten all Socket Set Screws with Allen Key NOTE: The rubber side of the plastic extrusion must be installed the opposite side of the socket set screws...
  • Page 63 sidewise Section: Date: Jul 2015 Page No: 6 of 6 Description: SID_104a ATTACH PANEL COVER STEP 7: Fasten Cover to Bracket as shown on illustration.
  • Page 64 (BZAMSL) x 1 B - Metal Modesty Bracket (A15-61699) x 2 - 20 x " Quad Pan Head Black (E01-50403) x 4 D - #12 x " Quad Pan Head Wood Screw (E04-50017) x 4 For Customer Support please contact product.support@teknion.com...
  • Page 65 sidewise Section: Date: Sep 2012 Page No: 2 of 3 Description: SID_104b BRACKETS TO MODESTY PANEL FASTEN BRACKET STEP 1: Bring Brackets to Modesty. STEP 2: Fasten Brackets with screws provided. NOTE: To determine the position of brackets, align holes of the Modesty Panel with the holes of the Worksurface.
  • Page 66 sidewise Section: Date: Sep 2012 Page No: 3 of 3 Description: SID_104b PLACEMENT OF MODESTY PANEL FASTEN MODESTY PANEL Underside View of Worksurface Outline of Support Outline of Frame Leg Underside View of Worksurface STEP 3: Place Modesty Panel as shown on illustration STEP 4: Fasten both Brackets to underside of Worksurface with screws provided.
  • Page 67 sidewise Section: Date: Sep 2012 Page No: 1 of 7 Description: SID_201 SAFETY STOPPER REMOVE SAFETY STOPPER Safety Stopper NOTE: Safety Stopper is placed in Tower so Drawers are not pulled too far out. STEP 1a: Remove Safety Stopper...
  • Page 68 sidewise Section: Date: Sep 2012 Page No: 2 of 7 Description: SID_201 UNFASTEN TRACK UNFASTEN TRACK STEP 2a: Pull Drawer so Tracks are fully extended. Unfasten screw that holds Track and STEP 3a: Unfasten other Track. Bracket together...
  • Page 69 sidewise Section: Date: Sep 2012 Page No: 3 of 7 Description: SID_201 LIFT FRONT ALIGN SUPPORT ASSEMBLY STEP 4a: Lift front of Drawer off of Track STEP 5a: Slide Drawer back so it unhooks from Rail. NOTE: Make sure Track stays in the full extended position...
  • Page 70 sidewise Section: Date: Sep 2012 Page No: 4 of 7 Description: SID_201 LIFT AND REMOVE STEP 6a: Lift Drawer off Track and remove. NOTE: To reinstall, reverse procedure.
  • Page 71 sidewise Section: Date: Sep 2012 Page No: 5 of 7 Description: SID_201 PULL OUT DRAWER STEP 1b: Pull out Drawer so that Track is in its full extended position. Squeeze Triggers on the bottom of Drawer to release from Drawer Tracks.
  • Page 72 sidewise Section: Date: Sep 2012 Page No: 6 of 7 Description: SID_201 LIFT AND REMOVE STEP 2b: Lift off Track and remove.
  • Page 73 sidewise Section: Date: Sep 2012 Page No: 7 of 7 Description: SID_201 REINSTALLATION STEP 3b: To reinstall, reverse procedure. NOTE: when reinstalling, make sure Bracket rests on the side of the Track.

This manual is also suitable for:

Sidewise swdbcSidewise swdbdSidewise swdbeSidewise swdbfSidewise swebbSidewise swcba ... Show all