Table of Contents
Advertisement
Operation
6.6.2
6.7
48
03.00|Clamping device SVP-Mini auto/SVP-RM auto|en
Replacing the battery
1 Push left and right unlocking button simultaneously and remove
the battery (1) through the front side of the pump (2).
2 Move the recharged battery into the pump (2) until it clicks into
place.
Actions after the usage
Cleaning
• Clean the intermediate sleeve in the clamping unit.
• Clean clamping diameter in the polygonal jaw chuck. Suitable
tube brushes are available as accessory:
Storage
• Store the TRIBOS clamping device in unpressurised condition.
• Slightly oil the intermediate sleeve and the housing of the clamp-
ing unit for storage.
• Cover the pump. A bag is available as accessory:
( 1.4, Page
7).
( 1.4, Page
7).
Advertisement
Table of Contents
