H3C S5120-EI Series Command Reference Manual page 220

Port VLAN ID(PVID): 1
Port and protocol VLAN ID(PPVID) : 1
Port and protocol VLAN supported : Yes
Port and protocol VLAN enabled
VLAN name of VLAN 1: VLAN 0001
Auto-negotiation supported : Yes
Auto-negotiation enabled
OperMau
Power port class
PSE power supported
PSE power enabled
PSE pairs control ability : No
Power pairs
Port power classification : Class 0
Link aggregation supported : Yes
Link aggregation enabled
Aggregation port ID
Maximum frame Size: 1536
# Display the LLDP information sent from all the neighboring devices in the form of a list.
<Sysname> display lldp neighbor-information list
System Name
System1
System2
System3
Table 47 Output description
Field
LLDP neighbor-information of port 1
Update time
Chassis type
Chassis ID
: No
: Yes
: speed(1000)/duplex(Full)
: PD
: No
: No
: Signal
: No
: 0
Local Interface Chassis ID
GE1/0/1 000f-e25d-ee91
GE1/0/2 000f-e25d-ee92
GE1/0/3 000f-e25d-ee93
Description
LLDP information received through port 1.
Time when LLDP information about a neighboring device is last updated.
Chassis information:
•
Chassis component
•
Interface alias
•
Port component
•
MAC address
•
Network address (the IP address type, such as ipv4)
•
Interface name
•
Locally assigned (indicating the local configuration)
ID that identifies the LLDP sending device, which can be a MAC address,
a network address, an interface or some other value depending on the
chassis type.
208
Port ID
GigabitEthernet1/0/5
GigabitEthernet1/0/6
GigabitEthernet1/0/7