H3C S5120-EI Series Command Reference Manual page 217

Field
Port description
Management address interface
type
Management address interface
ID
Management address OID
Port VLAN ID(PVID)
Port and protocol VLAN
ID(PPVID)
Port and protocol VLAN
supported
Port and protocol VLAN enabled
VLAN name of VLAN 1
Auto-negotiation supported
Auto-negotiation enabled
OperMau
PoE supported
Power port class
PSE power supported
PSE power enabled
PSE pairs control ability
Power pairs
Port power classification
Link aggregation supported
Link aggregation enabled
Aggregation port ID
Maximum frame Size
MED information
Description
Port description.
Numbering type of the interface identified by the management address.
Index of the interface identified by the management address.
Management address object ID.
Port VLAN ID.
Port protocol VLAN ID.
Indicates whether protocol VLAN is supported on the port.
Indicates whether protocol VLAN is enabled on the port.
Name of VLAN 1.
Indicates whether auto-negotiation is supported on the port.
Indicates whether auto-negotiation is enabled.
Current speed and duplex state of the port.
Indicates whether PoE is supported on the port.
PoE device type:
•
PSE—Power sourcing equipment
•
PD—Powered device
Indicates whether the device can operate as a PSE.
Indicates whether the device is operating as a PSE.
Indicates whether the PSE-PD pair control is available.
PoE mode:
•
Signal—PoE via signal lines
•
Spare—PoE via spare lines
Port power classification of the PD:
•
Class 0
•
Class 1
•
Class 2
•
Class 3
•
Class 4
Indicates whether link aggregation is supported.
Indicates whether link aggregation is enabled.
Aggregation group ID, which is 0 if link aggregation is not enabled.
Maximum frame size supported.
MED LLDP information.
205