System Board Cage - HP 200 G4 22 Maintenance And Service Manual

System board cage

The system board cage is located under the system board.
1. Prepare the computer for disassembly
2. Remove the display (see
3. Remove the fan (see
4. Remove the heat sink (see
5. Remove the system board (see
6. Remove the six Phillips screws (1) that secure the stand bracket to the computer.
7. Remove the stand bracket from the computer (2).
8. Remove the eight Phillips screws (1) that secure the cage to the computer.
38 Chapter 4 Removal and replacement procedures
(Preparation for disassembly on page
Display on page 18).
Fan on page 26).
Heat sink on page 33).
System board on page
16).
35).