Memory - HP 200 G4 22 Maintenance And Service Manual

4. Rotate the top of the display over and place it next to the computer. Be careful not to accidentally
disconnect the display cables from the computer.
To install the display, reverse the removal procedure.

Memory

For a list of available memory modules, see
1. Prepare the computer for disassembly
2. Remove the display (see
3. Spread the two retention clips outward (1) until the memory module tilts up at a 45° angle.
4. Grasp the edge of the memory module (2), and then gently pull the module out of the slot. Use the same
procedure to remove both memory modules.
IMPORTANT:
Do not touch the components on the memory module.
To protect a memory module after removal, place it in an electrostatic-safe container.
Computer major components on page
(Preparation for disassembly on page
Display on page
To prevent damage to the memory module, hold the memory module by the edges only.
18).
4.
16).
Memory 19