Cleaning The Keyboard; Cleaning The Monitor; Cleaning The Mouse; Service Considerations - HP 200 G4 22 Maintenance And Service Manual

All-in-one business pc
Table of Contents

Advertisement

After cleaning, always wipe the unit with a clean, lint-free cloth.
Occasionally clean the air vents on the computer. Lint and other foreign matter can block the vents and
limit the airflow.

Cleaning the keyboard

Follow all safety precautions in
To clean the tops of the keys or the keyboard body, follow the procedures described in
case on page
When cleaning debris from under the keys, review all rules in
before following these procedures:
CAUTION:
keys.
Visible debris underneath or between the keys may be removed by vacuuming or shaking.
Canned, pressurized air may be used to clean debris from under the keys. Caution should be used as too
much air pressure can dislodge lubricants applied under the wide keys.
If you remove a key, use a specially designed key puller to prevent damage to the keys. This tool is
available through many electronic supply outlets.
IMPORTANT:
improperly removed or installed, the keyboard may not function properly.
You can clean under a key with a swab moistened with isopropyl alcohol and squeezed out. Be careful
not to wipe away lubricants necessary for proper key functions. Use tweezers to remove any fibers or
dirt in confined areas. Allow the parts to air dry before reassembly.

Cleaning the monitor

Wipe the monitor screen with a clean cloth moistened with water or with a towelette designed for
cleaning monitors. Do not use sprays or aerosols directly on the screen; the liquid may seep into the
housing and damage a component. Never use solvents or flammable liquids on the monitor.
To clean the monitor body follow the procedures in

Cleaning the mouse

Before cleaning the mouse, ensure that the power to the computer is turned off.
Clean the mouse ball by first removing the retaining plate and the ball from the housing. Pull out any
debris from the ball socket and wipe the ball with a clean, dry cloth before reassembly.
To clean the mouse body, follow the procedures in

Service considerations

Keep these considerations in mind during the disassembly and assembly of the computer.
12
Chapter 3 Routine care, SATA drive guidelines, and disassembly preparation
General cleaning safety precautions on page 11
11.
Use safety glasses equipped with side shields before attempting to clean debris from under the
Never remove a wide leveled key (like the space bar) from the keyboard. If these keys are
before cleaning the keyboard.
General cleaning safety precautions on page 11
Cleaning the computer case on page
Cleaning the computer case on page
Cleaning the computer
11.
11.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents