Sun Microsystems Sun Ultra 5 Service Manual page 248

DOC
dpi
DRAM
DTAG
DTE
EBus
ECC
EDO
EIDE
EMI
Ethernet
FBC
FCC
FIFO
flash PROM
Gbyte
GUI
IDC
IDE
I/O
JTAG
Kbyte
LAN
LED
MAC
Glossary-2 Sun Ultra 5 Service Manual • February 2000
Department of communications.
Dots per inch.
Dynamic random-access memory. A read/write dynamic memory in which the
data can be read or written in approximately the same amount of time for any
memory location.
Dual tag or data tag.
Data terminal equipment.
Extension bus.
Error checking code.
Extended data out.
Enhanced IDE.
Electrostatic magnetic interference. Electrical phenomena that directly or
indirectly contributes to a degradation in performance of an electronic system.
A type of network hardware that provides communication between systems
connected directly together by transceiver taps, transceiver cables, and various
cable types such as coaxial, twisted-pair, and fiber-optic.
Frame buffer controller. An ASIC responsible for the interface between the
UPA and the 3DRAM. Also controls graphic draw acceleration.
Federal communications commission.
First-in-first-out.
Flash programmable read-only memory.
Gigabyte.
Graphical user interface.
Insulation displacement connector.
Intergrated drive electronics.
Input/output.
IEEE standard 1149.1.
Kilobyte.
Local area network.
Light-emitting diode.
Media access controller.