Removing The System Cover - Sun Microsystems Sun Ultra 5 Service Manual

5.6

Removing the System Cover

Remove the system cover as follows (
1. Using a No. 2 Phillips screwdriver, remove the two screws securing the system
cover to the chassis.
2. Grasp the center front edge of the system cover. Slide the system cover toward the
rear of the system until the cover tabs release.
3. Lift the system cover straight up. Set it aside in a safe place.
FIGURE 5-5
5-8 Sun Ultra 5 Service Manual • February 2000
System cover
Removing the System Cover
):
FIGURE 5-5
Screw (2)
Cover tab