Advertisement
Quick Links
Part Number
0000-8G-K01
Package Contents
U-Nut (Qty. 8)
Washer (Qty. 8)
Snap Head Screw (Qty. 8)
0
Before Installation
A. Area to be covered by mask must be clean. It is recommended that you wash and wax vehicle prior to installation.
B. Both vehicle and mask must be completely dry prior to installation. If moisture under mask is allowed to dry on
vehicle, paint may cloud.
C. Any repainted surfaces in contact with mask must be allowed to cure completely. Consult paint manufacturer or
repair facility if you are not sure.
1
Install Hood Cover
A. With hood open, stretch hood cover (A)
onto hood, pulling each side one or two
inches at a time, until corners fit snugly.
Install hooks on ends of straps (B) into
corresponding holes in hood. Pull
evenly on ends of adjustable straps (B)
until tight. Secure loose ends in elastic
loops.
Genuine Accessories
Installation Instructions
Front Mask
Hood Cover (Qty. 1)
Front End Cover (Qty. 1)
2
B
1
3
Page 1 of 4
Applicable Models:
2004 Mazda RX8 Base
Tools Required
Stubby Phillips
Screwdriver
A
B
AS 090-M11356cmc1105RevA
Advertisement
Related Manuals for Mazda 0000-8G-K01
Summary of Contents for Mazda 0000-8G-K01
- Page 1 Page 1 of 4 Genuine Accessories Installation Instructions Applicable Models: Part Number Front Mask 2004 Mazda RX8 Base 0000-8G-K01 Package Contents Tools Required Stubby Phillips Screwdriver U-Nut (Qty. 8) Hood Cover (Qty. 1) Washer (Qty. 8) Front End Cover (Qty. 1) Snap Head Screw (Qty.
- Page 2 Page 2 of 4 Install wheel well hardware Remove wheel well fasteners A. In both front wheel wells, lift wheel well liner to reveal holes. A. Using stubby phillips screwdriver, remove five plastic fasteners along front edge of both front wheel wells. B.
- Page 3 Do not machine dry! fender and hood). If adjustment is necessary, adjust the hood cover by adjusting the hood cover straps. C. Use Mazda Vinyl/Leather Protectant (or equivalent) to Refer to step 1. preserve color and finish.
Need help?
Do you have a question about the 0000-8G-K01 and is the answer not in the manual?
Questions and answers