Troubleshooting - Toolson DKS1600 Translation From The Original Instruction Manual

12. Troubleshooting

Problem Possible Cause
Saw blade gets loose Fastening nut tightened insufficiently
after turning off the
motor
Motor does not start a) Failure mains fuse
b) Extension cable defect
c) Connections on the motor or switch
defect
d) Motor or switch defect
26 GB
Help
Tighten fastening nut, M20 left-handed thread
a) Check the mains fuse.
b) Change extension cable
c) Have it checked by an electrican
d) Have it checked by an electrician