Reconnection; Configuration - Mcube MM8003 User Manual

4.2.4

Reconnection

In the 'Settings' page, user can enable the reconnection feature by selecting it to be enabled or
disabled. Once it sets to enable, mobile device will connect to the target MM8003 automatically
when connection is lost.
4.2.5

Configuration

There are three different functions in the configuration block. User can config MM8003 ODR
through 'Device config' to 25 Hz or 50Hz. The 100Hz is not supported in APP because of the
limitation of BLE. For default configuration, please refer to Table 6.
The 'Algorithm config' tab controls the setting of MM8003 modes (AHRS/IMU) and location of
reference magnetic field. Default configuration could be referred to Table 6.
mCube Proprietary
© 2019 mCube Inc. All rights reserved.
Figure 19: Data Logger Operations
Figure 20: Reconnection
Figure 21: Configuration of ODR
APS-045-0032V1.0
MM8003 User Manual
22