Data Logging - Mcube MM8003 User Manual

MM8003 User Manual
Figure 18: 3D View in OSM APP
4.2.3

Data Logging

Similar to the mCube OSM toolbox, the OSM APP allows user to record the sensor raw data
and Euler angles through BLE via CSV file in the mobile root path. It can be easily imported to
MATLAB, Excel, Python, etc. for further evaluation.
Step 1. After MM8003 is connected to the mobile device, user can switch the page from
'Dashboard' to 'Plots'. Click 'Log' at the upper right-hand corner of the APP to enable Data
Logger.
Step 2. Switch the status bar to start logging data into mobile storage. Data structure is as
same as the description in Table 5.
Step 3. User can stop the logger at any time by switching the status bar again. File path pop-
ups immediately for user reference. User can export the CSV files from mobile to computer
through cable or send them into the cloud space. Full operation process is shown in Figure 19.
21
mCube Proprietary
APS-045-0032V1.0
© 2019 mCube Inc. All rights reserved.