Alarm Reset; Alert Signalling - Toshiba Strata CT DKT2510-FS User Manual

Alarm Reset

3. Dial another account
code by repeating Steps
1 and 2.
4. Dial a telephone number. Any digits dialled after the code is entered in Step 2 is treated as
Alarm Reset
Your Strata CT system can be connected to a facility alarm system. All telephones produce a startling
tone whenever this alarm is activated.
To reset the alarm
Alarm Reset
Press

Alert Signalling

Alert Signalling enables you to send an alert sound to a predesignated (partner) station by pressing a
single button. This feature is based on the "buzz" key, where, for example, a manager might alert his/
her administrative assistant to enter the office.
You can have as many as four
telephones. An Alert Signal is sent even if the alerted telephone is busy (on/off-hook) or in the DND
or Call Forward mode.
To send an Alert Signal
Alert Signal
Press
20
If the code is invalid, you hear two
short tones.
The last code entered is recorded.
part of a telephone number.
.
Alert Signal
(s) to send or receive an Alert Signal to/from other
. An alert tone sounds at the designated station.
Strata CT Digital Telephone User Guide November 2001
Features
NO. 204
CODE NOT VALID