Memos; Speed Dial Memos - Toshiba Strata CT DKT2510-FS User Manual

Memos

Page
3. Press
Memos

Speed Dial Memos

You can store names (12 characters max.) for each of 40 station speed dial numbers. The memo pad of
names can be scrolled to select the appropriate party. The station must be enabled via system
programming for LCD message memory.
To program Speed Dial names and numbers
Redial
1. Press
Dial
.
2. Dial a station speed dial code.
Mode
3. Press
4. Enter the name or memo (12
characters maximum).
Mode
5. Press
6. Enter a phone number (16
characters maximum).
Redial
7. Press
memory.
102
. Your LCD confirms the message
was sent.
Speed
, then
See
dial codes.
. If a name was previously stored on
this code, it appears on the top line.
The name appears on the bottom line as you enter it. (See
"To enter LCD characters" on Page
.
The number displays on the top line as you enter it.
to record data in
Table 17 on Page 158 for speed
Strata CT Digital Telephone User Guide November 2001
LCD Operation
MSG SEND
# * 100 SPEED DIAL
*100 NAME
SPEED DIAL
94.)