Message Waiting Light On [Pdn] - Toshiba Strata CT DKT2510-FS User Manual

Message Waiting

Message Waiting Light on [PDN]

To answer a Msg light
Msg
1. Press
handset.
If you reach a station that is
busy or does not answer, go
on-hook and press
The system rotates to the next
message sender.
The LCD can show up to three
stations that have left messages
for the [PDN] and three for
each of your [PhDNs].
Scroll
2. Press
3. After receiving the message(s),
place the handset on hook.
To cancel the Msg light
Msg
Press
...or [DN] +
the light. This must be done for
each message recorded.
52
, then lift the
Msg
again.
to display them.
and lift the handset.
#409
to cancel
Your phone rings the station or voice mail device that
set the indication. The LED continues to flash red.
In the example (shown at
right), the display indicates
that station DN [ 203 ] received
a message signal from DN [
The "+" indicates additional messages.
If the Msg LED continues to flash, you have more
messages–repeat the Steps to retrieve them. Voice mail
devices may cancel the indication after a short delay.
Your Msg LED turns OFF when the called party
answers.
Note The called party must answer–by either going
off-hook or by pressing
indication to be cancelled automatically.
Your Msg LED turns OFF without calling the
telephone or VM device.
Strata CT Digital Telephone User Guide November 2001
NO. 204
CALL 203-201+
].
201
Spkr
–for the
Features