Dtmf Tone Dialling With * And; Hold; Retrieve A Call On Hold - Toshiba Strata CT DKT2510-FS User Manual

Single Line Digital Telephone Features

DTMF Tone Dialling with * and #

You may have to send
or computer output service. See your System Administrator to find out whether the
telephone has been programmed for DTMF tones or as a Speed Dial button.
While on an outside call, press
#
then .

Hold

Line
With the
Conf/Trn
The
Note
feature
While on a call, press
once to hold internal or outside
calls
...or press twice to enable
Exclusive Hold. The Line LED
flashes at the exclusive hold
rate.

Retrieve a Call on Hold

Line
Press
Strata CT Digital Telephone User Guide November 2001
#
and DTMF tones to some devices or services, such as a voice mail device
*
, You can now output
*
the duration of the call. This procedure must be repeated on
each call where you require such output.
button, you can place a call on hold or exclusive hold for retrieval at a later time.
button also places calls on hold (see
"Call Park Orbits" on Page
Hold
again.
and
*
"Conference Calls" on Page
126).
The Line LED flashes at the internal hold rate.
Exclusive Hold enables you to place a call on hold so
Note
that only you or somebody using a Call Pickup code
at another station can retrieve it.
If a call is not retrieved by a certain time (set in system
programming), it recalls back to your phone. You hear
repeated recall tone (or if you are on the phone, you hear
recall tone twice).
If the held party hangs up, the call is released and the
Exchange provides a hold-release signal.
DTMF Tone Dialling with * and #
button on your
*
#
, DTMF tones, and digits
0 9
~ for
129) and the
135