Led Indicators - Toshiba Strata CT DKT2510-FS User Manual

LED Indicators

LED Indicators
Each line and feature button has a LED next to it which indicates the status of the line or feature
associated with the button.
Line LEDs light red or green and flash at varying rates to indicate call status (see
Table 3 LED Indicators
Line or [DN] In-Use
(access outside line)
Incoming Call
(while ringing)
Hold (outside line)
If using Pooled Line Grp, the hold
indication is only at the station that
places the call on hold.
Hold – Consultation
(during consultation/transfer to another
station)
Hold – Exclusive (outside line)
Hold – Recall
(when held call recalls your idle
station)
Hold – Exclusive Recall
Internal Call
(while station ringing)
Busy Station Transfer
(outside call transferred to your busy
station from a designated station or
AA)
After disconnecting first call...
Alert Signal
Conference
10
Use
2 seconds on, 1/8 second off
— 1/8 second ON/OFF
1 second on at 10 pulses/second
—1 second OFF
4 pulses/second for 1/8 second
ON/OFF
10 pulses/second
10 pulses/second
1 second at 2 pulses/second,
1 second at 10 pulses/second
1 second at 2 pulses/second, 1
second at 10 pulses/second
Your [PDN] flashes 10 pulses/
second—1 second off
4 pulses/second, 1/8 second ON/
OFF
10 pulses/second
.5 seconds
10 pulses/second
Your Station (Green)
Interval Rates
Strata CT Digital Telephone User Guide November 2001
The Digital Telephone Grand Tour
Table 3).
Other Station (Red)
steady
one second ON/OFF
1/2 second ON/OFF
steady
steady
flashes
steady
[SDN] red flashing or
green ringing
3/4 second on, 1/8
second OFF
2 pulses/second
4 seconds
steady