Exchange Line Queuing - Toshiba Strata CT DKT2510-FS User Manual

Single Line Digital Telephone Features

Exchange Line Queuing

If all outgoing Exchange lines are busy, the Exchange Line Queuing feature will ring your telephone
when one is available.
1. If you hear busy tone after dialling
a Exchange line access code, press
4
.
2. Hang up. (You can make other calls
while waiting for a line to become
available.)
3. Your telephone rings at a fast rate
when an Exchange line becomes
idle.
4. Answer within three rings to
prevent the callback from being
cancelled.
5. Dial the desired telephone number.
To cancel Exchange Line Queuing
Lift the handset and press
Line
...or press
Strata CT Digital Telephone User Guide November 2001
Busy tone stops, followed by dial tone (two secs.), then busy
tone resumes.
You hear Exchange dial tone. (If you hear busy tone, it
means the line has already been seized or has received an
incoming call. Your request is not cancelled. You will be
called again the next time a line becomes idle.)
If the original call was made using LCR (dial
automatically dials the number.
#43
Confirmation tone is heard.
#43
+ .
Exchange Line Queuing
9
), the system
131