Automatic Busy Redial (Abr) - Toshiba Strata CT DKT2510-FS User Manual

Single Line Digital Telephone Features

Automatic Busy Redial (ABR)

After reaching a busy outside number, you can activate ABR so that the Strata CT system
automatically redials the number at regular intervals. If the system redials an outside number that is
still busy, ABR resets and tries again. This feature may not be enabled on some (or all) lines in your
system—depending on the telephone line type connected. It also may not be enabled for your station.
ABR is not attempted while your station is busy, but continues to time-out.
1. When you reach a busy number,
Cnf/Trn
press
2. Hang up.
3. The system redials, up to 15 times,
every 30 or 60 seconds (depending
on system programming).
4. Your telephone receives ring tone,
when ABR dials the number and it is
available.
5. Lift the handset and wait for the
party to answer.
To cancel ABR
1. Lift the handset
...or lift the handset and press
2. When you reach a busy number, press
#44
.
Strata CT Digital Telephone User Guide November 2001
#44
+ .
Line
.
You hear confirmation tone.
The Line LED flashes.
If you do not pick up the handset within 30 seconds
after a connection is made, you hear a muted ring for
another 30 seconds, then the call disconnects.
You hear internal dial tone.
You hear confirmation tone.
Automatic Busy Redial (ABR)
117