Toshiba Strata CIX IP5000-UG-VC User Manual page 145

FB6
8. Press
the xIPU to which this IPT interfaces, then press
networked systems only.
FB11
9. Press
1
: manual setting, then press
then press
192
format
2
: auto setting by broadcast, then press
Hold
10. Press
11. Go off-hook and hang up. The IP endpoint will search for the xIPU, initialize and
then set the IP address (from 20 sec. to 60 sec.). Time, Date and PDN displays on
LCD when the information is set.
Notes
• See Table 18 on page 129
this procedure.
• If registration fails, check with the Administrator for the correct password (FB26).
 To manually set up the VLAN ID
The following steps are for manually setting the VLAN ID in an IPT. If this system is
not using VLAN tags or is using only the default (VID = 1) value, these steps are not
required.
Hold
1. Press
"Program Select ="
2
2. Press , then press the soft key Scrl until
FB21
3. Press
FB22
4. Press
FB23
5. Press
FB24
6. Press
Strata CIX IP5000-series Telephone UG
to enter the CIX Strata Net node number of the CIX node that contains
for xIPU IP address mode. Press one of the following:
Hold
Hold
. (e.g., if the xIPU IP address is "192.168.1.241," enter it in this
168 1 241
* * *
).
again to set all the above data.
for an explanation of the LCDs that you will see during
3 6 9 Hold
and then + + +
for VLAN Enable/Disable; 1 = Enable VLAN, 2 = Disable VLAN.
to enter the VLAN ID (1 – 4094) for this phone.
set the PC Port Type, 1 = Access, 2 = Trunk.
to enter the PC Port VLAN ID (1 – 4094).
07/09
Hold
. This FB setting is for CIX
FB12
. Press and enter the xIPU IP address,
Hold
.
(simultaneously). The display will show
FB21
is indicated.
Administrator Programming
IP Setup Instructions
127