Ipt Initialization; Ip5122-Sdc Headset Transmit Level Adjustment - Toshiba Strata CIX IP5000-UG-VC User Manual

IP5122-SDC
IP5122-SDC Programming

IPT Initialization

The IP5122-SDC has a fourth initialization option (FB4). ACO Default.
1. Press
2. Press
3. Press
settings. (LED On = revert to factory default, LED OFF = use the saved ACO
settings). This will set all the IP5122-SDC program options to factory default
values.

IP5122-SDC Headset Transmit Level Adjustment

The IP5122-SDC headset transmit level for ACO and IPT operation are set by
programming from the station.
1. Press
2. Press
3. Set the headset transmit level using FB1, FB2 and FB3 as shown in the table
below.
4. Press Hold again.
98
3 6 9 Hold
+ + + (simultaneously).
Vol
s then press Hold.
FB04
. Revert to factory default ACO settings or Use the saved ACO
3 6 9 Hold
+ + + (simultaneously).
#
then press Hold.
Transmit Level
Max. (louder)
(Default)
Min. (softer)
Headset Transmit Levels
FB1 FB2
OFF OFF
ON OFF
OFF ON
ON ON
OFF OFF
ON OFF
OFF ON
ON ON
Strata CIX IP5000-series Telephone UG
FB3 IPT Level
OFF +12 dB4
OFF +8 dB
OFF +4 dB
OFF 0 dB
ON -4 dB
ON -8 dB
ON -12 dB
ON -16 dB
ACO Level
+8 dB
+8 dB
+4 dB
0 dB
-4 dB
-7 dB
-7 dB
-7 dB
07/09