Toshiba Strata CIX IP5000-UG-VC User Manual page 182

Administrator Programming
IP5131-SDL Settings
5. Select the Cancel soft key to cancel the intended setting change and to move to the
Loop Back Test Screen without rewriting the NV-RAM data.
Ping Start and Stop

From the Loop Back Test screen, press the Ping Start
soft key. The Pinging Screen displays (shown right) and
Pinging starts.
Notes
• Pinging is attempted ten times on the Pinging Screen
and is stopped automatically. The screen will move to
the Loop Back Test Screen. The result is displayed in
the third line of the Loop Back Test Screen as "Last
result n/10 (successful operations/attempts made)."
• During Ping execution, the progress is displayed by showing "Executing n/10
(number of successful operations/number of trial operations)" in the third line on
the Pinging Screen.
• Pressing the "Ping Stop" or "Exit" key on the Pinging Screen will stop Pinging and
cause the screen to move to the Loop Back Test Screen. Then the result will be
displayed.
164
Pinging
Ping to 192.168.0.77
Executing 5/5
Ping Stop
Strata CIX IP5000-series Telephone UG
[Exit]
Config
07/09