Reset Factory Default Settings
To reset the LCD settings to Factory defaults
3
1. Press
+
2. Press Volume
Hold
3. Press
FB01 – Resets Terminal Data (This includes Handset Volume and Handset/
Headset sidetone.)
FB02 – Resets LCD Contrast / Backlight data
FB03 – Resets Network data.
FB04 – Resets Analog CO settings (on IP5122-SDC only).
4. Press FBxx to turn on initialization FB will light red.
5. When FB's have been selected, press Hold to save the settings.
6. Lift the handset off-hook /on-hook to perform initializations. Telephone will reset.
Handset Volume
3
1. Press
+
Redial
2. Press
Hold
3. Press
FB01 – Sets Handset Transmit (Tx) volume
FB02 – Sets Handset Receive (Rx)
4. Press FBxx and enter a value from -8dB to +6dB. Default value is 0. (Tx/Rx)
To enter a negative number, use the * key in place of the "-" sign.
Note
Hold
5. Press
6. Lift the handset off-hook /on-hook to save settings.
Strata CIX IP5000-series Telephone UG
6
9
Hold
+
+
(simultaneously).
to access Initializing Mode.
6
9
Hold
+
+
(simultaneously).
button.
to access Sound Level Setting Mode.
to save settings.
07/09
Administrator Programming
Reset Factory Default Settings
131