Ring Volume Settings; Hands Free - Toshiba Control panel module for monitor 20550 User Manual

• In standby mode
• Battery status icon changes to battery low.
• "Charge Battery" message blinks on and off on the display.
To restore your battery capacity, return the handset to the charging unit.
After the handset is on the charging unit for one minute the battery icon
stops blinking and the battery low tone stops.
Mute
 During talk mode, press the menu/MUTE button on the front of the handset.
The MUTE icon displays on the screen and the microphone is dead.
 Press the menu/MUTE button again to cancel the mute condition. Finishing the
conversation also cancels the mute condition.

Hands Free

 Press the speaker-icon button in either standby mode or during a call. The
handset goes to hands-free operation and the speaker icon displays on the
screen.
 Press TALK to return to "non-speaker" (normal) operation.
 Press the speaker-icon button (or TALK button twice) to end the call and return
to idle.
Volume Settings
 Volume setting can be changed from Levels 1 to 6 (highest). Talk mode,
hands-free mode and headset mode each have volume settings. When the +/-
buttons are pressed, the handset immediately goes to volume setting mode,
sounding the ringer and displaying the current volume for five seconds.
During this time use the +/- buttons to change the volume.

Ring Volume Settings

When the + (up) button is pressed when the handset is idle, the
handset goes to the Ringer Volume setting and displays the current
setting. The Ring volume is changed as follows:
4