Tone First / Voice First Signalling; Tone First Signalling; Voice First Signalling - Toshiba Strata CIX IP5000-UG-VC User Manual

Tone First / Voice First Signalling

To determine the signalling on the telephone circuit.

Tone First Signalling

When the telephone rings and the called party must press Spkr or lift the handset in
order to receive the call.

Voice First Signalling

The telephone does not ring when it is being called, rather a long tone is heard,
followed by the caller's voice coming through the speaker. This method automatically
starts in a hands free mode and allows both parties to speak with each other.
The calling party has control over whether Tone First or Voice First Signaling is
Note
being used. The ability to switch between the two is setup by the System
Administrator.
 To change the signalling method while placing the call
1. Enter the extension number
1
2. Press to turn on Tone First Signaling.
2
3. Press to turn on Voice First Signaling.
Strata CIX IP5000-series Telephone UG 07/09
Feature Operations
Tone First / Voice First Signalling
85