Ip Telephone Function Settings - Toshiba Strata CIX IP5000-UG-VC User Manual

IP Telephone Function Settings

These steps enable you to turn On/Off button beeps, room noise cancellation, handset
Busy Override, and headset volume control. You can also adjust the setting for carbon
headsets vs. non-carbon headsets.
3
1. Press +
0
2. Press then
3. Press the Feature Buttons to turn the LEDs On/Off (see
Table 18 IP Telephone Function Settings
FB
FB1
Buttons beep. (Default)
Speakerphone/Microphone sensitivity
FB12
is lower.
Enable handset Busy Override (BOV)
FB4
tone.
FB6
Handset carbon supported.
Turn LED On if carbon headset is
FB11
attached.
Hold
4. Press
5. Lift the handset off-hook / on-hook to save the settings.
Strata CIX IP5000-series Telephone UG
6 9 Hold
+ + (simultaneously).
Hold
.
LED ON
to set the above data.
07/09
Administrator Programming
IP Telephone Function Settings
Table
LED OFF
Buttons do not beep.
Speakerphone/Microphone sensitivity is
normal. (Default)
Disable handset BOV. (Default)
Auto (default)
Turn LED Off if carbon headset is not
attached. (Default - recommended for GN
Netcom Headset GN9330)
18).
129