Toshiba Strata CIX IP5000-UG-VC User Manual page 165

GRQ Port Number
1. From IP Configurations > Advanced > GRQ Port.
The current GRQ Port Number displays (shown
right).
2. Enter the New number. (Maximum 5 digits).
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change
and go to the Advanced Setting screen.
For other notes, refer to
Note
RRQ Port Number
1. From IP Configurations > Advanced > RRQ Port. The
current RRQ Port Number displays (shown right).
2. Enter the New number. (Maximum 5 digits).
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change
and go to the Network Setting screen.
For other notes, refer to
Note
Application Server Address
1. From IP Configurations > Advanced > AP Addr. The
current Application Server Addr screen displays
(shown right).
The Application Server Address can be an IP
Note
Address or a URL (alphanumeric). See
Alphanumeric Characters" on page 148
URL.
2. Follow the steps
page 140. Also see
additional information.
Strata CIX IP5000-series Telephone UG
"Station ID" on page
"Station ID" on page
"To change settings on the screen" on
Table 21 on Page 148
07/09
Administrator Programming
GRQ Port Address
0
Backspace = Vol-Down
[Set]
142.
RRQ Port Number
0
Backspace = Vol-Down
142.
[Set]
Application Server Addr
192.168. 0. 235
"Dial Pad
Backspace = Vol-Down
to enter the
[Set]
for
IP5131-SDL Settings
:Current
:New
[Cancel]
Config
:Current
:New
[Cancel]
Config
:Current
:New
[Cancel]
Config
147