Connecting Other Equipment; Connecting The Power - Tascam VS-R264 Reference Manual

Connecting other equipment

This is an example of VS-R264/VS-R265 connections.
Precautions before making connections
o Carefully read the operation manuals of the devices to be
connected and then connect them correctly.
o Before making connections, turn this unit and all equipment
to be connected off (standby).
o Install all connected devices, including this unit, so that they
are powered from the same line. When using a power strip
or similar device, be sure to use one that has high current
capacity (thick cable) in order to minimize fluctuations in
power voltage.
Video camera
Display
Mixer
Switching hub that supports
PoE Plus power supply
Computer

Connecting the power

Connect a switching hub that supports PoE Plus power supply
or use a dedicated PS-P1220E AC adapter (sold separately) to
power this unit.
Supplying power with PoE Plus
Using a category 5E or higher LAN cable, connect the VS-R264/
VS-R265 to a switching hub that supports PoE Plus power
supply.
ATTENTION
Do not connect the dedicated PS-P1220E AC adapter when
using PoE Plus power supply.
NOTE
To connect to a switching hub that does not support PoE Plus
power supply, use a dedicated PS-P1220E AC adapter (sold
separately) to supply power.
Supplying power with a dedicated AC
adapter
Connect a TASCAM PS-P1220E AC adapter (sold separately) to
the unit's DC IN 12V connector the unit.
ATTENTION
Never use any adapter other than the designated PS-
P1220E AC adapter. Use of a different adapter could cause
malfunction, fire or electric shock.
3 - Preparation
7
TASCAM VS-R264 / VS-R265