Table of Contents
Advertisement
4 - Using Streaming Dashboard
Device Settings screen
The Device Settings screen shows the status of all VS-R264/VS-
R265 units on the current network and can be used to change
their settings.
Click the
button to change the settings of the VS-R264/VS-
R265 selected with the Select a Device item.
1 Select a Device
Select the name of the VS-R264/VS-R265 that will have its
settings changed.
Click the b button to show a list of all VS-R264/VS-R265
units connected to the network.
2 Setting page display
Click the buttons to open the corresponding pages.
General page
Name
This shows the name of the VS-R264/VS-R265 that is
displayed in Streaming Dashboard.
Click this area to make the cursor blink, enabling character
input.
The default name when shipped new from the factory is
"[model name]+[MAC address]".
Device Roles
These turn the unit's encoder and decoder functions on and
off.
Click a switch to change its on/off setting.
20
TASCAM VS-R264 / VS-R265
Security page
Manage the password on the Security page.
Setting the password
1.
Click the Authentication switch to set it to "ON".
2.
Click the Enter a Password input field, making the cursor
blink.
Input the password.
Uppercase and lowercase letters and numbers can be used.
The maximum number of characters is 8.
NOTE
The password is blank when unit is shipped new.
If no password is set, settings will not be protected.
3.
Click the Confirm Password input field, making the cursor
blink.
Input the password again.
4.
Click the
button to save the password.
5.
Click the Authentication switch to disable the password.
NOTE
If the password is forgotten, authentication can be disabled
by restoring the unit to its default settings.
See "5 - Hardware Reset Function" on page 23 for how to
restore default settings.
Advertisement
Table of Contents
