Table of Contents
Advertisement
4 - Using Streaming Dashboard
Decoder Audio Settings screen settings
Make audio output settings on this screen.
Balanced Reference Level
Use to set the balanced output headroom (difference
between the maximum and reference levels).
Settings: -16 dBFS (default), -14 dBFS, -9 dBFS
Click this to open a setting value list.
Analog Output Level
Use to adjust the output level sent to each output connector.
To adjust the value, drag the slider left and right or click the
number and enter the value with a keyboard.
Range: -72 dB - +6 dB
Analog Mute
Click this switch to turn it "On" and mute the analog output.
After completing settings on this screen, click one of the buttons
below to save the settings.
o Click the
button to save the settings and close the
settings screen.
o Click the
button to save the settings.
NOTE
Click the
button to close the settings screen without
saving the settings.
18
TASCAM VS-R264 / VS-R265
Decoder Stream Settings screen settings
Make decoder streaming input settings on this screen.
Source Encoder
Select the encoding source.
Click this to open a list of encoding sources.
Stream Type
Use to select the streaming type.
Click this to open an option list.
The content of the list shown depends on the setting of the
Source Encoder item.
After completing settings on this screen, click one of the buttons
below to save the settings.
o Click the
button to save the settings and close the
settings screen.
o Click the
button to save the settings.
NOTE
Click the
button to close the settings screen without
saving the settings.
Advertisement
Table of Contents
